yacht stemhead fittings

	(001) 401-739-1140 -- (001) 401-739-1149

Chainplates are the items by which the hull or deck is attached to the lower end of the Standing Rigging, usually a Turnbuckle. Most are made from Stainless Steel strap or bar and are bolted to the hull, to the cabin sides, or to a bulkhead and pass directly through the deck, usually through a Chainplate Cover bolted to the deck. Some are bent at the top to better align with the rigging loads. are designed to accept two separate shrouds at the same location.

Less common are for use with Upset Toggle Turnbuckles, and which bolt directly to the deck. are bolted to the deck and/or hull at the stem for attachment of the Forestay, and sometimes incorporate an attachment point for a Jib tack shackle. Sometimes what would normally be called Chainplates are used as and the reverse is also true.

Chainplates and Stemhead Fittings are listed below by configuration, and then by the size of the Pin they are attached to the rigging with. If you require Chainplates or Stemhead Fittings not listed here, we stock some others and are able to fabricate a variety of Custom ones, please forward a sketch with complete measurements and details for a quote.

~ Back to Sailboat Hardware Main Page ~

Davey
Sonstige Hersteller
Spartan

Chain plates & Steamhead fittings

… corresponding, beautifully shaped fittings for traditional ships, classic yachts and dinghies are primarily made of cast bronze.

Welcome to R&W Rope!

Join our community today and get 10% off your first order..

Be the first to know about our latest products and special offers, delivered directly to your inbox. Sign up now and start saving!

By entering your email address you agree to receive R&W Rope emails. You can withdraw your consent at any time. Please refer to our Privacy Policy and Terms of Service or Contact Us for further details

POPULAR PRODUCTS

Shop by material.

Davey & Company Bronze Stemhead Fittings

$ 86.39 86.39 USD $ 86.39

Not available for sale.

Item 3727/GM (Stemhead Fitting) 3729/GM (Lightweight Stemhead Fitting)
Comments / Notes

This combination does not exist.

Notes: Comments / Notes

Terms and Conditions 30-day money-back guarantee Shipping: 2-3 Business Days

Cast in Bonze with a beautiful polished finished, this strong stemhead takes the load down the front of the stem. The 3727 is suitable for boats up to 18 feet. The 3729 size suitable for dinghies up to about 12 feet.

3727 has a 6 in. inside length with an 85 degree inside angle, 1 in. wide. 1 5/16 in height above stem. 3729 has a 4 1/4 in. length, 2 1/2 in. front strap, and is 3/4 in. wide.